Products & Services - Chains & Drive Components

Sprockets for taper-lock bushes

Taper-lock clamping bushes enable the precise axially-centred fixing of hubs on shafts. When used with sprockets, they offer the advantage of faster fitting and better centring than shaft-to-hub connections with keyways.

Note: The corresponding taper-lock bush must be ordered separately.

170 Products
Sort by:

Taper-lock bush

Taper-lock bush, Taper bush 1008 bore=14mm groove=5x2,3mm

Taper-lock bush

Taper-lock bush, Taper bush 2517 bore=30mm groove=8x3,3mm

Taper-lock bush

Taper-lock bush, Taper bush 1210 bore=28mm groove=8x3,3mm

Taper-lock bush

Taper-lock bush, Taper bush 3030 bore=55mm groove=16x4,3mm

Categories that may be of interest to you

Fast fitting, precise centring

Sprockets with taper-lock bushes ensure a frictional connection between shafts and hubs. The conical locking mechanism consists of a hub and a bush.Axial screws press the bush into the hub, wedging it against the shaft and locking it in place.

Where higher loads are concerned, we recommend the use of a keyway as an additional positive connection. This type of connection is easy to fit, but it is sensitive to any slight imbalances when in operation.

Contact

You have a specific question or would you simply like to learn more about us?
Find our contact information below or use our Contact Form.

Callback

I would like to receive a call.